AVSJ3 Variable Speed Pool Pump Motor 56J

EVSJ3-NS Variable Speed Pool Pump Motor 56J

This setup is the perfect solution to convert your existing pool pump into an ultra high efficiency variable speed design, at a much lower cost.

This motor will replace any horsepower power from .5hp up to 3hp.

Increased demand on the power grid, rising energy costs and environmental concerns have prompted many states to enact legislation requiring the use of more energy efficient pool motor products. Unlike the traditional pool pump motor, the energy saving, easily programmable ECOTECH EZ motor/ control can reach efficiency levels of up to 90 percent and help reduce energy costs! Its brushless permanent magnet motor, control, and user interface all work together to provide an efficient, easy-to-use alternative to existing induction motors. And, with an approximate one-year payback (depending on energy costs in your area) and continued savings throughout the life of the motor, ECOTECH EZ motor/control is an excellent choice.

The AVSJ3 model replaces outgoing EVSJ3-NS.

Compatibility  
American Products AmericanaSwimquip XL-IIJacuzzi Magnum
American Products EagleSwimquip XL-IIIWaterco SupaSelect
Hayward Super PumpSwimquip XL-VWaterco HydroStorm
Hayward Super II PumpMarlowWaterco HydroStorm Plus
Hayward NorthstarJacuzzi 'P' SeriesWaterco HydroSelect
Hayward Max-Flo IJacuzzi 'PH' SeriesWaterco HydroStar

Installation Is Easy:

AVSS3 Variable Speed Pool Pump Motor 56Y

Variable Speed 56Y Motor EVSS3-NS

Although our specialty is rebuilding pool pumps and motors we also offer brand new units such as this with complete factory warranty.  This setup is the perfect solution to convert your existing pool pump into an ultra high efficiency variable speed design, at a much lower cost.

This motor will replace any motor ranging in horsepower power from 1/2 hp up to 3 hp.

Increased demand on the power grid, rising energy costs and environmental concerns have prompted many states to enact legislation requiring the use of more energy efficient pool motor products. Unlike the traditional pool pump motor, the energy saving, easily programmable ECOTECH EZ motor/ control can reach efficiency levels of up to 90 percent and help reduce energy costs! Its brushless permanent magnet motor, control, and user interface all work together to provide an efficient, easy-to-use alternative to existing induction motors. And, with an approximate one-year payback (depending on energy costs in your area) and continued savings throughout the life of the motor, ECOTECH EZ motor/control is an excellent choice.

This is the latest AVSS3 model (formerly EVSS3-NS).

Compatibility  
Sta-Rite Dura-GlasAmerican Products Ultra-Flo
Jandy/Zodiac JEP
Sta-Rite Dura-Glas II
American Products Power Pump
Jandy/Zodiac SHPM
Sta-Rite Max-E-GlasAmerican Products / Pentair Ultra-Flo
Jandy/Zodiac SHPH
Sta Rite Max-E-Glas II
Pac-Fab/Pentair Challenger
Jandy/Zodiac PHPF
Sta-Rite Max-E Pro
Pac-Fab/Pentair Whisper- Flo
Jandy/Zodiac PHPM
Sta Rite Intellipro
Pac-Fab/Pentair Whisperflo XF
Jandy/Zodiac FHPM
Sta-Rite SuperMax
Pac-Fab PinnacleJandy/Zodiac VS FloPro
Sta-Rite SuperMax VS
Pentair Super-Flo
Jandy/Zodiac ePump
Sta-Rite Dyna-Glas
Pentair Super-Flo VS
Jandy/Zodiac MaxHP MHPM
Sta-Rite Dyna-Pro
Hayward Eco Star
Waterway Econo Flo
Sta-Rite Dyna-Wave
Hayward Tri Star
Waterway SMF
Sta-Rite Dyna-Jet
Aqua-Flo Dominator
Waterway Champion
Sta-Rite PLBC
Waterco SupaStream
Waterway SVL56
Waterco SupaTuf

Installation Is Easy:

Pentair WhisperFlo 2 HP Full Rated Pump 011515 WFE-8

Pentair Whisperflo 2 HP Pump 011515 WFE-8

Product ModelVoltageFull Load AmpsHPSFSFHPCertificationPort Size
011515 WFE-8208-230 11.0-10.221.302.60UL1, NSF22" x 2"
This unit has been completely rebuilt to factory specifications.

Rebuilding Process:

  • Complete tear down and inspection of all components (including end-bells, motor shaft, capacitor, etc.)
  • All debris is thoroughly removed.
  • Hi-pot at 1500 volts and re-insulate stator with Class “F”. (Shorted motors are scrapped).
  • All motor components ground down with an open wire brush and insulated/painted inside and out.
  • Bearings are replaced with ABEC rated components.
  • Terminal board is inspected and cleaned.
  • Motor is tested for proper amp draw and efficiency.
  • All seals and gaskets are replaced. Main seal is genuine US Seal brand.
  • New lid is installed.

Features:

  • Oversized strainer basket and volute – industry standard in pool pumps.
  • Standard and Energy-efficient Square Flange Motor.
  • Compatible with all cleaning systems, various filters and jet action spas.
  • Heavy-duty/durable construction is designed for long life.
  • Designed for residential and commercial applications.

Pentair WhisperFlo 1.5 HP Full Rated Pump 011514 WFE-6

Pentair Whisperflo 1 HP Pump 011513 WFE-4

Product ModelVoltageFull Load AmpsHPSFSFHPCertificationPort Size
011514WFE-6208-2309.6-8.81.51.47 2.20 UL1, NSF22" x 2"
This unit has been completely rebuilt to factory specifications.

Rebuilding Process:

  • Complete tear down and inspection of all components (including end-bells, motor shaft, capacitor, etc.)
  • All debris is thoroughly removed.
  • Hi-pot at 1500 volts and re-insulate stator with Class “F”. (Shorted motors are scrapped).
  • All motor components ground down with an open wire brush and insulated/painted inside and out.
  • Bearings are replaced with ABEC rated components.
  • Terminal board is inspected and cleaned.
  • Motor is tested for proper amp draw and efficiency.
  • All seals and gaskets are replaced. Main seal is genuine US Seal brand.
  • New lid is installed.

Features:

  • Oversized strainer basket and volute – industry standard in pool pumps.
  • Standard and Energy-efficient Square Flange Motor.
  • Compatible with all cleaning systems, various filters and jet action spas.
  • Heavy-duty/durable construction is designed for long life.
  • Designed for residential and commercial applications.

Pentair WhisperFlo 1 HP Full Rated Pump 011513 WFE-4

Pentair Whisperflo 1 HP Pump 011513 WFE-4

Product ModelVoltageFull Load AmpsHPSFSFHPCertificationPort Size
011513WFE-4115/208-230 14.8/7.8-7.4 11.651.65UL1, NSF22" x 2"
This unit has been completely rebuilt to factory specifications.

Rebuilding Process:

  • Complete tear down and inspection of all components (including end-bells, motor shaft, capacitor, etc.)
  • All debris is thoroughly removed.
  • Hi-pot at 1500 volts and re-insulate stator with Class “F”. (Shorted motors are scrapped).
  • All motor components ground down with an open wire brush and insulated/painted inside and out.
  • Bearings are replaced with ABEC rated components.
  • Terminal board is inspected and cleaned.
  • Motor is tested for proper amp draw and efficiency.
  • All seals and gaskets are replaced. Main seal is genuine US Seal brand.
  • New lid is installed.

Features:

  • Oversized strainer basket and volute – industry standard in pool pumps.
  • Standard and Energy-efficient Square Flange Motor.
  • Compatible with all cleaning systems, various filters and jet action spas.
  • Heavy-duty/durable construction is designed for long life.
  • Designed for residential and commercial applications.

4 HP 2×2.5″ Executive Spa Pump 2-Speed 3721621-13

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 2 ½” intake for improved flow performance and reduced noise
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°

4 HP 2×2″ Executive Spa Pump 2-Speed 3721621-1D

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°

2 HP 2×2.5″ Executive Spa Pump 2-Speed 3720821-13

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 2 ½” intake for improved flow performance and reduced noise
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°

3 HP 2×2″ Executive Spa Pump 2-Speed 3721221-1D

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°

2 HP 2×2″ Executive Spa Pump 2-Speed 3720821-1D

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°

3 HP 2×2.5″ Executive Spa Pump 2-Speed 3721221-13

This unit has been completely rebuilt to factory specifications. Our pumps are wet tested (run at full capacity) continuously for 2 hours to ensure leak free operation when it arrives. This pump includes a high performance glass filled Waterway Executive Series pump wet-end that insures years of corrosion free operation


Features:

  • Executive wet end designed specifically for 56-frame motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed motors have four sets of insulated windings for increased efficiency
  • 56-frame motor for added strength, cooler operating temperature and longer motor life
  • Large 2 ½” intake for improved flow performance and reduced noise
  • Large 6 ½” diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of motor
  • Highly versatile wet end can be rotated every 90°